|
|
An important message from the president of J & L:
Hello everyone, and thank you for visiting our site. After more than 10 years of online retailing with our original shopping system, we have finally completed our "New" modern database shopping site. As of Mid-April 2008, we have offically turned off shopping capabilities on these static pages. All side navigation buttons will lead you to the proper catagory in the new system. All product pages have buttons that link to the same item in the new system where you will have a more pleasurable shopping experience with advance searching and more organization. To move right into the system click here. I welcome you to email your comments and suggestions about the new site to New-site@jlusa.com. I hope you enjoy your safe and secure shopping experience. - Irv Miller |
Peerless Handcuffs
Peerless Model 700 - Chain
Link Handcuffs
Since its introduction in 1914 the Peerless standard handcuff continues
to be the industry standard. The Model 700's have all steel construction
and heli-arc welded chain links. It meets or exceeds all National Institute
of Justice requirements. Smooth single strand action allows for fast
and
efficient cuffing. Profiled edges reduce the risk of tissue and nerve
injuries. Comes complete with two standard keys.
Features:
Weight: 10 oz.
Material/Finish: Carbon Steel/Nickel
Minimum opening: 51 mm/2 inches
Minimum inside perimeter: 150 mm/5.9 inches
Maximum inside perimeter: 211 mm/8.3 inches
Maximum overall length: 236 mm/9.3 inches
|
Peerless Model 801
- Hinged Handcuffs
The Peerless® Model 801 provides additional restraint by more effectively
restricting hand and arm movements. The Model 801 features all steel
construction, spun rivets, machined edges and smooth single strand action.
The Model 801 has the ability to fold flat for compact storage. It has
a 10% larger inside perimeter then the Model 700. The Model 801 has been
approved by the National Institute of Justice. Lifetime warranty for
manufacturing defects and two keys supplied.
Features:
Weight: 12oz.
Material/Finish: Carbon Steel/Nickel
Minimum opening: 56 mm/2.2 inches
Minimum inside perimeter: 163 mm/6.4 inches
Maximum inside perimeter: 231 mm/9.1 inches
Maximum overall length: 216 mm/8.5 inches
|
|
|
Peerless Model 5030 - Oversized
Handcuffs
Designed specifically for larger individuals or special
security applications. This oversized cuff has a 20% larger inside perimeter
than the Model 500. The M5030 is designed
to meet the National Institute of Justice standards for workmanship,
mechanical strength, tamper resistance and corrosion resistance. Comes
complete with
two standard keys.
Features:
Weight: 12 oz.
Material/Finish: Carbon Steel/Nickel
Minimum opening: 70 mm/2.75 inches
Minimum inside perimeter: 191 mm/7.5 inches
Maximum inside perimeter: 254 mm/10 inches
Maximum overall length: 266 mm/10.5 inches
|
Peerless Model 703 Leg Irons
Each Peerless Model 703 - Leg Iron is built for years of service.
The Model 703 features all steel construction, welded rivets
and rust resistant nickel finish that conforms to the same rigid specifications as our other products. Machined edges reduce the risk of tissue
and nerve injuries. The 15" chain effectively limits range of motion.
Comes complete with two standard keys.
Features:
Weight: 15 oz.
Material/Finish: Carbon Steel/Nickel
Minimum opening: 70 mm/2.75 inches
Minimum inside perimeter: 191 mm/7.5 inches
Maximum inside perimeter: 254 mm/10 inches
Maximum overall length: 616 mm/24.25 inches
|
Peerless Model 7002
- Waist Chain with Handcuffs
Our Peerless transport/control waist chains are designed for maximum
security situations. The special heat treated steel chain and padlock
rings assure adjustment up to a 54 in. waist. This model has separated
handcuffs positioned over each hip. Comes complete with two standard
keys.
Features:
Weight: 29 oz.
Material/Finish: Carbon Steel/Nickel
Minimum opening: 51 mm/2 inches
Minimum inside perimeter: 150 mm/5.9 inches
Maximum inside perimeter: 211 mm/8.3 inches
Maximum overall length: 236 mm/60 inches
|
|